|
Varnish
This Special Compound Is Used To Fill Up And Protect Decorative Engravings On Case Backs, Bezels And Bands To Prevent Polishing Away Exclusive Decorations Or Logos That Would Be Very Costly To Reproduce. Instructions: Store Varnish In A Cool Dark Area Away From Sunlight. Mix Or Shake Up The 3.75 Ounce Water Based Varnish Well Before Applying To The Surface. Apply The Ps-Varnish Using A Cl-Tx758 Flat Polyester Texwipe Swab To The Surface Being Protected.
Specifications
The PS-Varnish requires 2 to 5 minutes to dry and become hard. Using an Elma-TD30 parts dryer with warm air will speed up the drying time. If too much PS-Varnish is applied allow the varnish to dry and buff off the excessive off using a felt buff with a scratch removing compound like PS185.MP61S. When you are done polishing remove the PS-Varnish using Ultrasonic Cleaning. Use a quality cleaning solution such as L&R Prep Clean solution #LR-078.
|
|
|
|